C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
CAUTION: Observe lead at right of sliding roof.
7
Move pop-up bracket (3) toward front on both sides
NOTE: Until the lower sliding jaw (7) on mount (4) can be pivoted upward and out through the opening in the sliding rail (5).
8
Pivot sliding jaw on rear mount (7) upward on both sides
9
Remove mount (4) from pop-up bracket (3)
CAUTION: Do not break off retaining lug (8)
10
Push pop-up bracket (3) approx. 30 mm toward front on both sides
11
Remove pop-up bracket (3) out of sliding rail(5)
12
Install in the reverse order