C 240 4MATIC Wagon (203.281) V6-2.6L (112.916) (2003)
19
Remove condensate water drain hoses (7)
20
Disconnect connector (8) from evaporator temperature sensor (B10/6)
21
Slightly remove AC housing from fire wall
CAUTION: Installation: moisten seal (11) on AC housing air inlet with soap solution.
-
Do not oil seal. Ensure that seal (11) on AC housing air inlet is seated properly.
-
Grease guides (12).
-
MB long-term grease
22
Remove cockpit wiring harness (9) from AC housing
23
Remove AC housing
CAUTION: Remove AC housing with aid of helper. Avoid damaging passenger compartment and AC housing.
24
Install in the reverse order
25
Read diagnostic trouble code memory and erase
26
Synchronize actuator motors.
Special Tools
Set of Plugs, P/N# 129 589 00 91 00
Commercially Available Tools
Commercially Available Tools