C 240 Wagon (203.261) V6-2.6L (112.912) (2003)
Brake Caliper: Service and Repair
AR42.10-P-0070P Remove/Install Front Axle Brake Caliper
Remove/Install Front Axle Brake Caliper
- except CODE (949) EVOLUTION sport package
- except CODE (950) EVOLUTION AMG sport package
Shown On Model 203
Remove/Install
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
-
Risk of poisoning from swallowing brake fluid. Risk of injury from brake fluid coming into contact with skin and eyes.
-
Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling
brake fluid.
CAUTION:
-
See brake fluid notes
-
See notes on repairs to brake system
1
Remove front wheels
2
First disconnect brake hose (51) at brake line (5) and then at floating caliper (31a)
NOTE:
-
Seal off line connections immediately with plugs. The brake fluid reservoir must not be allowed to empty completely.
-
Unclip brake hose from bracket.
CAUTION: See notes on installing brake hoses
3
Unplug left front brake pad contact sensor (S10/1) from plug connection (S10/1x1).
CAUTION: See notes on installing contact sensor for brake lining wear indicator
4
Unscrew brake pad contact sensor plug (31e) from floating brake caliper
CAUTION: Installation: Install new self-locking bolts
5
Unscrew floating caliper (31a) from steering knuckle