C 240 Wagon (203.261) V6-2.6L (112.912) (2003)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Remove/Install Belt Pulley/Vibration Damper
Shown On Engine 112
1
Remove engine compartment paneling
2
Remove front air filter cover or engine hood
3
Remove viscous fan (1)
NOTE: Right-hand thread!
4
Fan shroud (3)
5
Remove poly V-belt (2)
6
Unscrew central bolt (4)
NOTE: Installation: Measure length of center bolt (bolt head contact surface to end of shank). Bolt may be used up to max. shank length of 78
mm.
7
Take off vibration damper (5)
NOTE:
-
Installation: Oil thread of center bolt.
-
Location of vibration damper.
-
Installation: A particular installation position is given through the parallel key!
8
Install in the reverse order.
9
Check oil viscosity after performing engine test run.