C 240 Wagon (203.261) V6-2.6L (112.912) (2003)
10
Remove torsion bar bracket (6b)
NOTE: Installation: Ensure that spacer washer (6c) is correctly seated.
11
Drain rear axle
NOTE:
-
Use lever to press rear axle away from tank when lowering.
-
Continue lowering the rear axle until it is possible to remove and install the rubber bushings using the removal and installation tool.
12
Extract rubber mount for front rear axle mount(1a)
13
Pull out rear rubber bushing for rear axle mount (1b)
14
Install in the reverse order