C 240 Wagon (203.261) V6-2.6L (112.912) (2003)
Wiper Arm: Testing and Inspection
AR82.30-P-6000-01Q Check Wiper Arms
AR82.30-P-6000-01Q Check Wiper Arms
Special Tools
1
Remove adapter (D) and choke angle gauge (A) from the adjustment tool set.
2
Insert adapter (D) into the guide (arrow) of the choke angle gauge (A) and fasten with knurled bolt to choke angle gauge (A).
Shown on model 209, driver-side wiper arm (1) in reverse position
3
Insert adapter (D) at choke angle gauge (A) into the wiper blade mount of the driver-side wiper arm (1) and clamp tight by twisting the locating
bolt (2).
4
Lower driver-side wiper arm (1) until all three jacking points of the choke angle gauge foot (A) touch the windshield.
5
Read angle of incidence of driver-side wiper arm (1) on the dial of the choke angle gauge (A) and record.
6
Lift driver-side wiper arm (1), loosen choke angle gauge (A) by twisting the locating bolt (2) from the driver-side wiper arm (1) and remove.
7
Repeat testing procedure for front passenger side wiper arm.