C 280 (202.028) L6-2.8L (104.941) (1994)
/l6-2.8l_(104.941)/Page-647010.png)
Remove/Install Fuse Box In Trunk
Removing And Installing Fuse Box In Trunk
Illustrated On Model 202
1
Disconnect ground cable at the battery
2
Unclip cover on fuse box (4)
3
Unscrew nuts on left support base for fuse box (F4)
4
Unclip fuse box from sheet metal channel on floor of trunk and remove right support base from guide
5
Remove fuse blocks (A, B and C)
6
Disconnect leads on fuse boxes or fuse blocks Connect leads to fuse boxes or fuse blocks.
CAUTION: Disconnect leads only when replacing entire fuse and relay box. Tie disconnected leads from individual fuse blocks together
and mark to prevent mix-ups.
See "Special Tools" given below.
Connect leads from fuse boxes or fuse blocks.
7
Reinstall in opposite order
Special Tools
