C 280 (203.054) V6-3.0L (272.940) (2006)
Evaporative Emission Control Canister: Service and Repair
Remove/Install Activated Charcoal Canister
Shown On Model 203.035 With Engine 111
Remove/Install
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Raise vehicle.
2
Take off right rear wheel
-
Wheelbolt = 110 Nm
3
Remove right rear fender liner (1)
DANGER:
-
Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from
contact with fuel.
-
No fire, sparks, naked flames or smoking.
-
Pour fuels only into suitable and appropriately marked containers.
-
Wear protective clothing when handling fuel.
4
Detach vent line (activated charcoal canister ->Motor) (2) and vent line (fuel tank -> Activated charcoal canister) (3) activated charcoal canister
(4)
NOTE: Installation: Observe connection diagram of fuel evaporation control system.
5
Push back clip (5)
NOTE: Push activated charcoal canister (4) up (arrow) for this step and take out.
6
Install in the reverse order