C 280 (203.054) V6-3.0L (272.940) (2006)
^ Follow the steps exactly as described in DAS/XENTRY.
^ Connect battery charger (battery voltage >12.5V).
1. Connect Star Diagnosis to vehicle.
2. Follow the DAS path below to SCN code Engine control module:
Control units/Drive/ME 9.7/Control unit adaptations/Variant coding/SCN coding
3. Fill out Repair Label and affix on underside of hood next to existing emissions labels (as shown in Figure 1).
Note:
^ Ensure the surface is clean prior to affixing the label.
^ Use a ball point pen to fill in the label; do not use a marker or felt tip pen.
^ The label is being mailed to dealers prior to the launch of this Recall Campaign. Additional labels are available as literature through NetStar free of
charge (order# P-BQ-AEM-LBL)
^ Campaign is now complete except for California dealers.
^ California dealers only, please proceed to next step.