C 280 (203.054) V6-3.0L (272.940) (2006)
The measuring principle of the lateral acceleration sensor is based on a spring/mass system with a capacitive detector. The voltage is supplied via the
ESP control module (N47-5).
Operation
The lateral acceleration which occurs during cornering causes the spring/mass element to move from its normal position to a position corresponding to
the magnitude of the lateral acceleration. Every change in position changes the electrical capacitance of the detector. An electronic analysis system
then generates a voltage signal which depends on the capacitance and, therefore, the lateral acceleration of the vehicle. This voltage signal is evaluated
by the ESP control module (N47-5).