C 320 CL (203.764) V6-3.2L (112.946) (2004)
Carpet: Service and Repair
AR68.20-P-4800PB Remove/Install Floor Covering In Rear
AR68.20-P-4800PB Remove/Install Floor Covering In Rear
Shown On Model 203.7
1
Remove front seats (1)
2
Remove center console (2)
3
Remove rear seat cushion (3)
4.1 Remove stowage compartment between rear seat cushions (3)
4.2 Remove bass module speaker
5
Unclip door sill molding (4) and remove
6
Remove belt end fitting (5) from bottom B-pillar
7
Remove edge protection in bottom area of side paneling
8
Unclip side paneling in bottom rear (6)
NOTE: Installation: Replace clips
9
Remove air ducts (7)
10
Route connection cable (8) through floor covering
11
Remove floor mat (9)
12
Install in reverse order