C 320 CL (203.764) V6-3.2L (112.946) (2004)
Sunroof / Moonroof Weatherstrip: Service and Repair
AR77.20-P-1150PB Remove/Install Rubber Bellows on Sliding/Pop-Up Roof
Removing And Installing Rubber Bellows On Sliding/Pop-up Roof
DANGER:
Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate and sliding roof.
-
When moving components ensure that no body parts or limbs are in the area of movement.
1
Open sliding/pop-up roof
2
Unclip front rubber bellows mount (1)
3
Pivot rubber bellows mount (1) upward
4
Unclip rubber bellows mount (1) at rear and remove
5
Unclip rubber bellows (2) from guide rail (3)
NOTE: Start at rear
6
Pull rubber bellows (2) out of rubber bellows rail (4)
7
Remove rubber bellows (2)
NOTE: Angularly toward front.
8
Move sliding/pop-up roof to pop-up position
9
Unclip rubber bellows rail (4)
NOTE: Start at rear
10
Pull rubber bellows rail (4) out of sliding/popup roof cover(5)
CAUTION: Installation: Guide pin (6) should catch audibly.
NOTE: Toward front.
11
Install in the reverse order
AR77.20-P-1300PB Remove/Install Seal For Tilting/Sliding Roof Panel
Removing And Installing Seal For Tilting / Sliding Roof Panel