C 320 CL (203.764) V6-3.2L (112.946) (2004)
-
Except Model 211, 230.474/475.
8
Crank engine with starter.
CAUTION: Do not crank engine at steering lock but use contact switch of the compression recorder.
9
Carry out test procedure at the remaining cylinders in the same way.
10
Compare measurements obtained with the specified pressures
-
Compression installation tolerance or new value.
-
Compression pressure of service limit or limit value.
-
Compression pressure of permissible difference between the individual cylinders. If the pressure is below the minimum compression pressure
or if the permissible difference between individual cylinders is exceeded: Inspect cylinders for leaks.
11
Install in the reverse order.