C 320 CL (203.764) V6-3.2L (112.946) (2004)
For starting up again, the STH heater unit (except model 220) or the STH or HB [ZUH] heater unit (model 220) must be switched off and on again
with the STH switch (N72s12 or S46) after eliminating the cause of the malfunction.
GF83.70-P-3052F No Flame Formation At Heater Operation Startup, Function
GF83.70-P-3052F No Flame Formation At Heater Operation Startup, Function
- with CODE (228) Stationary heater [models 203 up to 23.4.04, 209.3 up to 31.5.04, 215 as of 1.6.00 up to 31.8.02, 220 as of 1.6.00 up to 31.8.02,
230.4 up to 08]
Component Identification
Function sequence
1. The activated heating mode is indicated by the indicator lamp in the STH switch (N72s12 or S46).