C 320 CL (203.764) V6-3.2L (112.946) (2004)
Fuel Filler Neck: Service and Repair
AR47.10-P-7541PR Remove/Install Filler Neck of Fuel Tank
AR47.10-P-7541PR Remove/Install Filler Neck of Fuel Tank
Shown On Model 203.035 With Engine 111
Remove/Install
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Raise vehicle.
2
Take off right rear wheel
-
Wheel bolt = 110 Nm
3
Remove fender liner (1) in right rear fender
DANGER:
-
Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from
contact with fuel.
-
No fire, sparks, naked flames or smoking.
-
Pour fuels only into suitable and appropriately marked containers.
-
Wear protective clothing when handling fuel.
4
Slacken hose clamps (2)
5
Detach connection lines (3)
6
Remove screws (4).
7
Unscrew fuel filler cap
8
Press out rubber seal (5)
NOTE: Installation: Check rubber seal (5) for damage, replace if necessary. Ensure correct seating of rubber seal (5).