C 320 CL (203.764) V6-3.2L (112.946) (2004)
8
Fill supply reservoir
DANGER:
-
Risk of accident from the vehicle starting off by itself when the engine is running. Risk of injury from bruises and burns if you hold
your hand into engine when it is started or when it is running.
-
Secure vehicle to prevent it moving off.
-
Wear closed and close-fitting work clothes.
-
Do not grasp hot or rotating parts.
9
Engine ON
10
Increase engine speed to approx. 1000 1 rpm
11
Close throttle cock (039a) and check maximum service pressure
CAUTION: Perform the test quickly to prevent the oil temperature from rising too high.
12
Engine OFF
13
Extract oil from power steering pump supply reservoir
14
Disconnect tester (039)
15
Detach connection (040a) and connecting hose (040b)
16
Replace seals of high pressure expansion hose (30i)
17
Screw high pressure expansion hose (30i) onto power steering pump
18
Filling and bleeding power steering pump
19
Check power steering pump for leaks
-
Carry out visual inspection.
20
Mount air intake hose (47)
NOTE: Left-hand side.