C 320 CL (203.764) V6-3.2L (112.946) (2004)
Liftgate Window Glass: Service and Repair
AR67.20-P-3550PA Remove/Install Rear Window
AR67.20-P-3550PA Remove/Install Rear Window
DANGER:
Risk of explosion from electrolytic gas. Risk of poisoning and irritation if battery acid is swallowed. Risk of injury through burns to skin and
eyes from battery acid or when handling damaged lead-acid batteries
-
No fire, sparks, naked flames or smoking.
-
Wear acid-resistant gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers
1
Prepare glue cartridge
2
Open side window in driver's door.
3
Disconnect ground cable of battery
4
Remove rear spoiler
5
Unscrew telephone antenna
6
Remove tailgate wiper motor
7
Disconnect electrical connectors for heated window and antennas
NOTE: Fasten with adhesive tape to rear window.
DANGER:
-
Risk of injury from slipping when clamping blade in the multicutter and from glass splinters when cutting out bonded windows
-
Always interrupt air supply when inserting or removing blade.
-
Wear protective gloves and eye protection
8
Cut out pane with cutting blade
See "Special Tools - Cutting blade" given below.
See "Commercially Available Tools - Multicutter" given below.
9
Remove window from tailgate with suction cups
See "Commercially Available Tools - Suction cups" given below.
10
Align pane in body opening
-
Gap dimensions: Distance between bottom edge of window and edge of tailgate paneling - 2 mm
See "Special Tools - Feeler gauge " given below.
11
Prepare window for installation
12
Fasten electric leads to window with adhesive tape