C 350 (204.056) V6-3.5L (272.961) (2008)
Component Identification
7
Route branch-off line (1d) as shown and attach to the trunk floor using the line clips (30).
The two-way radio can be installed either in the glove box or in the luggage compartment. The two-way radio speaker electrical connectors
(X1/45) have to be connected to match the two-way radio's installation location. The assignment of the individual connectors is explained in
greater detail in the supplementary instructions for the rental vehicle equipment.
8
Route branch-off line (1e) of rental vehicle wiring harness (1) along the vehicle's wiring harnesses, behind the rear SAM control unit with fuse and
relay module (N10/2), to the ground point (trunk, right taillamp) (W7/1).
9
Screw ring-type eyelet of branch-off line (1e) onto the ground point (trunk, right taillamp) (W7/1).
10
Fasten the branch-off line (1e) onto the vehicle's existing wiring harness using cable ties.
11
Route the front section of the rental vehicle wiring harness (1) through the breakthrough (arrow) in the C-pillar forwards into the passenger
compartment.