C 350 (204.056) V6-3.5L (272.961) (2008)
Vehicles with Parktronic system (PTS) code 220
12.1. Arrest PARKTRONIC front bumper electrical connector (X26/27) to upper basic carrier (5) on right.
13. Insert outer air inlet grate (20) on right and left into front bumper paneling (1) from front, align and fasten with three 3.5 x 22 round head hex bolts
(21).
Tighten sheet metal screws (21) to torque of 1.2 Nm.
14. Insert impact absorber bracket (17) behind front fog lamp on left and right (E5/2) (see bottom picture).
The impact absorber bracket (17) should be installed in front of the left and right front fog lamps (E5/2).
15. Insert left and right front fog lamp (E5/2) into front bumper paneling (1) from rear, align at chrome ring on outer air inlet grate (20) and fasten
with four 3.5 x 22 round head hex bolts (19).
Position front fog lamp as shown in upper picture and carefully insert into bracket.