C 350 (204.056) V6-3.5L (272.961) (2008)
/v6-3.5l_(272.961)/Page-3062008.png)
Do not touch bonding surface (1) with bare fingers. The bonding surfaces (1) must be free of dust, oil, grease, wax, dirt residues and other adhesive
components, otherwise the adhesive force of the glued connection is impaired.
1. Guide application nozzle on bonding surfaces (1) along body flange. Simultaneously apply adhesive bead uniformly with a height of approx. 14
mm and a width of approx. 8 mm.
Electric cartridge gun
Immediately remove contamination caused by adhesive material.
AR77.21-P-0800-04CW Install Panoramic Roof Frame
AR77.21-P-0800-04CW Install Panoramic Roof Frame
- with CODE (413) Panoramic sliding roof
Special Tool
