C 350 (204.056) V6-3.5L (272.961) (2008)
Timing Chain: Procedures
AR05.10-P-7601-01VA Separate Timing Chain
AR05.10-P-7601-01VA Separate timing chain
Special Tools
Component Identification
1
Cover over timing case recess with a clean cloth.
The timing case recess must be secured against parts falling down. Parts that have fallen into the timing case recess must be removed.
2
Assemble the chain separating tool (01) and the pressure screw (02) together.
3
Fit the chain separating tool (01) at the timing chain (1).
Ensure that the pressure pin (03) lies at the pin (arrow) of a timing chain link.
4
Screw in the pressure screw (02) and separate the timing chain (1).
Do not let the pins that have been pushed out fall into the timing case recess.
5
Remove the pressure screw (02) and take off the chain separating tool (01).
AR05.10-P-7601-02VA Riveting the Timing Chain
AR05.10-P-7601-02VA Riveting the timing chain