C 350 (204.056) V6-3.5L (272.961) (2008)
^
Grind off paint around crack (Figure 4) to prepare area for welding.
Note:
Do not grind into cross member when removing paint from surface.
^
Place a metal heat shield (shop supply) between the fuel tank and the rear cross member (Figure 4).
^
MIG weld crack on cross member (Figure 5).
CAUTION!
Observe all safety procedures when welding on vehicle
^
Grind welding bead (Figure 6).
Note:
Do not grind into cross member when grinding welding bead.
CAUTION!
Ensure heat shield is in place (Figure 6)
4.
Paint welded area: