C 350 (204.056) V6-3.5L (272.961) (2008)
Component Identification
Clamping rear spring
Installation: When inserting the rear spring (6) ensure that the metal plate (7) and rubber ring (8) seat correctly.
1
Insert upper clamping plate (06) and lower clamping plate (07) in the rear spring (6).
Insert clamping plates (06, 07) so that as many spring coils as possible are pre-compressed.
2
Insert tensioning device (08) from below through the spring control arm (9) into the clamping plates (06, 07) and lock at the upper clamping plate
(06).
3
Tension rear spring (6).
Do not use an impact wrench.
4
Unclamp in the reverse order.