mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR77.20-P-0500-01EA Remove Paneling|Page 10661 > < AR77.20-P-0500-01EA Remove Paneling|Page 10659
Page 3
background image

3. Insert paneling (1) and slide toward rear.
4. Clip paneling (1) into sliding/pop-up roof cover.

5. Position sliding/pop-up roof half way in pop-up position. Check whether side moldings (4) can be pulled in or out.

AR77.20-P-0500-02EB Installing Cover

AR77.20-P-0500-02EB Installing Cover

1. Hook rail of rubber bellows (5) into slider (arrow).
2. Open tilting/sliding roof.
3. Install cover (2) and slide all the way back.

Shown without tilting/sliding roof panel

AR77.20-P-0500-03EA Replace Clip Bottom Section

AR77.20-P-0500-03EA Replace Clip Bottom Section

AR77.20-P-0500-01EA Remove Paneling|Page 10661 > < AR77.20-P-0500-01EA Remove Paneling|Page 10659