mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Location/Purpose/Design|Page 11884 > < Location/Purpose/Design|Page 11882
Page 2
background image

switch (S4).

Single-wipe/wash switch (S4s4):

When pressed to the pressure point (b) the wipers wipe the windshield once. If the switch is pressed beyond the pressure point (c), the windshield washer
and headlamp cleaning system (only on model 202 with code 600a) are activated.

The switch position is read in as a voltage coded signal by the electronic ignition switch (EIS) control module (N73).

Wiper speed switch (S4s5):

The wiper speed switch (S4s5) has four positions:
Wiper off (a), intermittent wipe (b), slow wipe (c), fast wipe (d).

The switch position is read in as a voltage coded signal by the electronic ignition switch (EIS) control module (N73).

Location/Purpose/Design|Page 11884 > < Location/Purpose/Design|Page 11882