C 55 AMG (203.076) V8-5.5L (113.988) (2006)
Control Arm Bushing: Service and Repair
AR35.20-P-0114-01B Remove/Install Spring Control Arm Rubber Mount
AR35.20-P-0114-01B Remove/install spring control arm rubber mount
- except CODE (P98) Black Series [Model 209]
Harder spring control arm rubber mount
Spring control arm rubber bearings standardized
Special Tools
Component Identification
Removing
1
Press rubber mount (6b) out of spring control arm using the removal and installation tool (06a, 06b).
To press out jammed rubber mounts (6b) precisely, first press the small protrusion of the rubber mount up to the spring control arm sleeve using a
flat pressure plate (06x).
Component Identification
Install
2
Using press out/in tool (06a, 06b), press rubber mount (6b) into spring control arm until both ends of steel sleeve are same distance from spring
control arm sleeve.