CL 500 (215.375) V8-5.0L (113.960) (2000)
8
Install bearing caps (6) according to their markings.
Installation: When installing the fit bearing cap (13), hold both thrust plates (8) tight. The anti-twist locks (11) of the thrust plates (8) must be locate
Component Identification
9
Moisten the thread and head contact surface of the bolts of the bearing caps with oil.
10
Tighten the bolts of the bearing caps as specified in the tightening procedure.
Note tightening torque and tightening angle of bearing cap bolts. If no torquing angle wrench is available, the bearing cap bolts can be torqued furth
11
Turn crankshaft to check for unobstructed movement.
AR03.20-P-4341-01CVA Install/Gauge Crankshaft Bearings
AR03.20-P-4341-01CVA Install/gauge crankshaft bearings
-
for reconditioned crankshaft
Modification Notes
Modification notes
Test specifications for crankshaft bearing clearance