CL 550 4MATIC (216.386) V8-5.5L (273.961) (2009)
Component Identification
2
Detach split heat shield (105c) (arrows).
Shows on model 211
Component Identification
3
Unscrew bolts (7a) from propeller shaft intermediate bearing.
4
Insert shop-made shims between frame floor assembly and propeller shaft center support bearing (arrows).
The dimension for the shims must be taken from the propeller shaft center support bearing, see following picture.
5
Screw in bolts (7a) for propeller shaft center support bearing
6
Attach split heat shield (105c).
7
Install cross member (31).
Shows on model 211
Example:
Component Identification
Shims (c) between frame floor and propeller shaft center support bearing.
Material: steel or aluminum