mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Headlamp Alignment Control Module: Service and Repair

AR82.10-P-4081M Remove/Install Headlamp Range Adjustment Control Module

- with CODE (612b) Xenon headlamps

Illustrated On Model 220

1

Connect quiescent current retention unit

2

Disconnect ground lead from battery

3

Fold back floor covering in passenger footwell and remove Styrofoam panel

4

Remove mounting plate (1) in passenger footwell and fold down into footwell

NOTE:  Grip mounting plate at top and fold down into footwell

5

Release catch and disconnect connector (2)

6

Unscrew screws (3) and remove headlamp range adjustment control module (N71) from mounting plate

7

Install in opposite order.

Relays and Modules > Relays and Modules - Lighting and Horns > Headlamp Alignment Control Module > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >