CL 55 AMG (215.374) V8-5.5L SC (113.991) (2004)
Parking Assist Distance Sensor: Customer Interest
Parking Assist System - Sensors Loose/Come Out Of Bumper
DTB
Date:
October 27, 2008
Order No.:
P-B-54.65/132a
Supersedes:
P-B-54.64/132 dated Dec. 30, 2004
Group:
54
SUBJECT: Model 215.373/374/375/376/378/379
All Model Years
Parktronic Sensor Loose or Releases Without Obvious Cause
If you receive customer reports in the above model vehicles of Parktronic sensors not firmly latched in the bumper support bracket/retainer tabs, this may
be caused by the retainer tabs of the sensor mount in the bumper being outside the allowed production tolerance. This may occur at the front and/or rear
bumper.
To resolve, bond the Parktronic sensors to the retainer tabs. Refer to Figure 1 for the appropriate bonding location. Any professional hot glue gun can be
used.
NOTE:
-
Please do not bond directly at the latching device (Figure 1, arrows).