CL 55 AMG (215.374) V8-5.5L SC (113.991) (2004)
1
Detach lower engine compartment paneling
2
Screw in threaded bolt (07n)
NOTE:
-
Model 215, model 220 without 4MATIC: Insert threaded bolts (07n) into the rearmost threaded holes "k" in the mounting rail.
-
To do this, unscrew the rear bolts from the rear engine crossmember (63).
-
Model 220 with 4MATIC: Insert threaded bolts into threaded holes "k".
-
To do this, unscrew the relevant bolts (see diagram) from the rear engine crossmember (63).
3
Install cradle (07) horizontally and adjust fixtures (07r, 07s) according to the vehicle model concerned
4
Install telescopic measuring rod (06) on retaining bolt (024b) with connecting parts
-
Use the relevant measuring bolt and probes (024) for the corresponding distance or comparison measurement.
5
Carry out distance and comparison measurements on front and rear axles
6
Detach cradle (07) and threaded bolts (07n)
7
Screw in bolts for rear engine crossmember (63) on both sides
8
Install lower engine compartment paneling.
AR40.30-P-0402I Performing Dimensional/Comparative Measurements
Carry Out Distance and Comparison Measurements On Front and Rear Axles