mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Steering|Tie Rod > < Procedures|Page 7789
Page 3
background image

9

Check fanfare horns and airbag clock spring contact (A45) for damage
-

Visual check, renew clock spring contact if necessary remove/install clock spring contact.

10

Install in the reverse order

11

Activate steering angle sensor

12

Deactivate service mode in TELE AID emergency call system

13

Read fault memory and erase

14

Conduct a road test
-

Check during road test:
-

Flasher canceling:

NOTE:  When the steering wheel is offset by more than 1 tooth, satisfactory resetting of the turn signal is no longer guaranteed.

-

Airbag indicator lamp:

NOTE:  The SRS malfunction indicator lamp must not light up with full steering angle in both directions.

-

Steering wheel position:

NOTE:  If the steering wheel is crooked, adjust it by max. 1 tooth. If the difference is greater, Check and adjust toe on front axle.

15

Render electrical system operational.

NOTE:  Perform basic programming (normalize windows and sliding roof, etc.).

Steering|Tie Rod > < Procedures|Page 7789