CL 600 (216.376) V12-5.5L Turbo (275.953) (2007)
Contra Sept is applied using a spray gun attached to a long probe. It is imperative to have as much of the evaporator sprayed with the cleaner by moving
the probe in / out and up / down inside the case. It may be necessary to bend the probe in order to gain access. The cleaner is applied and allowed to dry.
Refer to Figure 1a for spraying angle recommendation.
Note:
After cleaning the evaporator, a second treatment has to be conducted. After completion of section A (ContraSept), refer to section B (Wynns).
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on June
4, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.