CLK 320 (208.365) V6-3.2L (112.940) (1999)
Camshaft Bearing: Service and Repair
AR05.20-P-7103AU Remove/Install Camshaft Bearing Cap
Remove/Install Camshaft Bearing Cap
1
Remove cylinder head cover
-
Air cleaner mounted on vehicle.
-
Air cleaner positioned at engine side.
2
Position piston of cylinder 1 at 40 degrees after TDC
NOTE:
-
Engine must not be cranked backwards.
-
Rotate engine at crankshaft in direction of rotation until 40 degrees marking on belt pulley/vibration damper is aligned with marking on timing
case cover.
-
Grooves in the camshafts must point towards the "inner V".
3
Remove chain tensioner (A)