CLK 320 (208.365) V6-3.2L (112.940) (1999)
Headlamp Alignment Sensor: Service and Repair
Removing And Installing Front Axle Headlamp Range Adjustment Sensor
Model 208
1
Open engine hood
2
Unscrew nut (6)
3
Remove right front wheel
NOTE: The sensor is located in the wheelhouse on the upper right wishbone
4
Unscrew nut (3) and separate connecting rod from front axle sensor for headlamp range adjustment.
5
Disconnect electrical connector (5)
6
Remove front axle sensor (headlamp range adjustment) (A52)
NOTE: After replacing the front axle sensor for headlamp range adjustment reprogram the zero position with the HHT
7
Reinstall in opposite order