CLK 320 (208.365) V6-3.2L (112.940) (1999)
Headlamp Washer Reservoir: Service and Repair
Removing And Installing Headlamp Cleaning System Washing Water Reservoir
1
Move engine hood to upright position
2
Disconnect connector (3) on washing water indicator
3
Attach clamp (2) to hot water hoses (1) for washing water heating spiral
See "Special Tools" given below.
4
Remove hot water hoses (1) and unclip washing water reservoir
5
Unscrew plastic nuts (4) and remove washing water reservoir from mount
6
Remove windshield washer pump (M5/1) and unclip feed lines from washing water reservoir
NOTE: Plug opening in washing water reservoir with suitable plug
7
Remove headlamp washer pump (M5/2)
NOTE: Plug opening in washing water reservoir with suitable plug
8
Remove washing water reservoir upward
9
Reinstall in opposite order
Special Tools
Clamp, P/N # 000 589 40 37 00