CLK 320 (209.365) V6-3.2L (112.955) (2004)
/v6-3.2l_(112.955)/Page-876001.png)
Brake Bleeding: Service and Repair
AR42.10-P-0010P Bleed Brake System
Bleed brake system
Shown On Model 203.0
Bleeding
DANGER:
-
Risk of poisoning from swallowing brake fluid. Risk of injury from brake fluid coming into contact with skin and eyes.
-
Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling
brake fluid.
CAUTION:
-
See brake fluid notes
-
See notes on repairs to brake system
-
See notes on externally invisible brake fluid loss
1
Connect filling and bleeding device
NOTE: Pay attention to manufacturer's operating instructions.
-
Bleeding pressure 2 bar.
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
2
Jacking up and supporting vehicle
3
Carrying out bleeding operation
4
Connect filling and bleeding unit
Inspect
5
Check brake fluid in brake fluid reservoir and correct if necessary.
6
Check brake system for leaks.