CLK 430 (208.370) V8-4.3L (113.943) (1999)
Relay Box: Service and Repair
Removing And Installing Fuse And Relay Box
Illustrated On Model 208
1
Disconnect ground lead from battery
2
Remove fuse box cover (1)
3
Unscrew screws (2)
4
Remove relay box cover (3)
NOTE: Check gasket (10) for damage
5
Unscrew screw (4)
6
Remove fuse blocks (A-E)
CAUTION: Carefully remove carriers for fuse blocks (5) upward
7
Disconnect leads from fuse box or fuse blocks
CAUTION: Disconnect leads only when replacing entire fuse and relay box. Tie disconnected leads from individual fuse boxes or blocks
together and mark to prevent mix-ups.
See "Special Tools" given below.
Connect leads from fuse boxes or fuse blocks.
8
Remove relay holder carrier (7) together with relay holder (6)
NOTE: The relay holder is pivot-mounted on the relay holder carrier
9
Unclip connectors on bottom of relay holder (6)
10 Pull off all relays
NOTE: Only when changing relay holder Relay holder assignment
11 Remove paneling in footwell (driver-side)
12 Unscrew nuts (8)
13 Remove fuse and relay box (F1)
NOTE: Check gasket (9) for damage