CLK 550 (209.372) V8-5.5L (273.967) (2008)
Vehicles with Parktronic system (PTS), code 220
18.1. Arrest PTS, front bumper connector (X26/27) in inner section bracket (17) (see arrow).
On models 209.377/477 the front bumper PTS connector (X26/27) is fastened to the inner section (17) at the bottom right using a cable tie.
Vehicles with Parktronic system (PTS), code 220
19.1. Connect front bumper PTS sensor unit (A42) and insert into brackets
Before inserting front bumper PTS sensor unit (A42) check decoupling rings; replace if damaged.
Vehicles with headlamp cleaning system, code 600
20.1. Install HCS cover (22), removed from standard bumper, with HCS spring (23) into front bumper cover (1).
For this purpose, press bearing bracket on HCS cover (22) together and position on bearing pins. Then close HCS cover (22) and insert HCS
spring (23) (see bottom figure).