CLK 550 (209.372) V8-5.5L (273.967) (2008)
The window (1) must be in front of the seal.
Close the door for the measurement only up to the first pre-catch.
4. Check adjustment of window (1) with feeler gage
Dimension (a) :Upper edge of window to retaining rail (A-pillar).
Dimension (b) :Upper edge of window to retaining rail (roof).
If measured values deviate from nominal value: adjust height.
Height setting
5. Lower the window.
6. Remove grommets.
7. Adjust window relative to the roof.
Turn adjustment screw (3) through opening in bottom of door (2).
Turning left: adjustment downward