CLK 550 (209.372) V8-5.5L (273.967) (2008)
Air Register: Service and Repair
AR68.10-P-1150Q Remove/Install Center Air Nozzle
AR68.10-P-1150Q Remove/Install Center Air Nozzle
1
Remove both trim rings (1)
CAUTION!
Carefully pry off trim rings (1). Avoid damaging instrument panel.
2
Loosen covering (2) and take out
CAUTION!
Avoid damaging instrument panel.
3
Unscrew bolts (3)
4
Unlatch catch lugs (4) in air nozzle duct
NOTE:
Removal: Pull out air nozzle (5).
See Special Tools below
5
Take out air nozzle (5)
6
Install in the reverse order
7
Perform function check
NOTE: Flap of air distributor must open and close completely.
Special Tools