CLK 550 (209.372) V8-5.5L (273.967) (2008)
AR35.30-P-0661P Remove/Install C.V. Joint or Rubber Boot on Rear Halfshaft
AR35.30-P-0661P Remove/Install C.V. Joint or Rubber Boot on Rear Halfshaft
1
Remove rear axle shaft (37a)
2
Remove hose clamps (37k)
NOTE: Installation: Replace hose damps (37k), observing the hose clamp width
3
Remove boot cap (37i) from joint ring (37b, 37c)
NOTE: Installation: Do not oil or grease the O-ring.
4
Dismantle constant-velocity joint
NOTE: Refer to Dismantling constant-velocity joint, inspecting for wear, assembly
5
Press joint hub (37d) off the rear axle shaft (37a)
NOTE: Refer to Press joint hub (37d) off the rear axle shaft (37a), press on and caulk