CLK 550 Cabriolet (209.472) V8-5.5L (273.967) (2007)
/v8-5.5l_(273.967)/Page-3419006.png)
3. Remove stop plug (10) on left and stop plug (11) on right vehicle longitudinal member.
Stop plugs (10, 11) are no longer required.
4. Remove front stop plugs (12, 13) from right and left wheel well.
Stop plugs (12, 13) are no longer required.
5. Pull seal (4) onto right longitudinal member reinforcement (3).
The longitudinal member reinforcements are labeled with a sticker for the right and left side. Use antifriction agent. Observe installation position
of gasket (4). The arrow on the seal (4) must point upward.
6. Insert right longitudinal member reinforcement (3) into right vehicle longitudinal member.
