CLK 550 Cabriolet (209.472) V8-5.5L (273.967) (2007)
NOTE: Use plug from brake caliper vent nipple.
11
Remove hydraulic pump (11)
Install
12
Install hydraulic pump (11)
13
Remove plug from hydraulic lines (9)
14
Position hydraulic lines (9) with connection plate (10)
15
Unscrew screws (8) from connection plate (10)
-
Screw of connection plate to hydraulic unit = 10 Nm
16
Tighten hydraulic pump bracket (6) with nut (5)
17
Connect plug (7) to hydraulic unit
18
Tighten hydraulic pump ground cable (2) with nut (1)
19
Tighten hydraulic pump power supply cable (4) with nut (3)
20
Install soft top compartment hydraulic cylinder
21
Check oil level of hydraulic system
NOTE: If necessary add oil through oil filler screw.
Oil filler plug - Oil filler screw on hydraulic unit supply reservoir = 2 Nm
22
Sealing and function check
23
Install paneling in trunk
Hydraulic Soft Top