CLK 550 Cabriolet (209.472) V8-5.5L (273.967) (2007)
NOTE: Installation: Rub the diaphragm travel sensor at the front with some spirit or soap suds so that when inserting the O-ring slides correctly.
7
Replace O-ring
NOTE: Installation: insert O-ring into groove of brake booster ensure correctly located.
8
Install in the reverse order
Inspecting
9
Start engine
NOTE: Operate brake several times.
10
Switch off engine
11
Check diaphragm travel sensor for tightness
NOTE: Air flow noises must not be audible at the brake booster.
12
Perform basic programming
13
Read diagnostic trouble code memory and erase
AR43.10-P-0355QB Remove/Install Brake Booster Vacuum Line
AR43.10-P-0355QB Remove/install brake booster vacuum line
Component Identification