mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF83.40-P-2105-02Q Automatic Air Conditioning Box, Function|Page 13284 > < GF83.40-P-2105-02Q Automatic Air Conditioning Box, Function|Page 13282
Page 12
background image

Blended air mode without activated charcoal filter

Component Identification

Normal mode without activated charcoal filter convenience automatic air conditioning (C-AAC)

Settings:

-

AC OFF On

-

Both AUTO buttons pressed

-

Activated charcoal filter OFF

-

Recirculated air mode OFF

Function

In the normal mode (AC OFF lit up), fresh air (A) is drawn in by the blower motor (A32m1) as a result of the position of the fresh air/ recirculated air
flaps actuator motor (M2/5). The air, which is purified by the dust filter (1), is conducted as a result of the position of the activated charcoal filter flap
adjustment motor (A32m2) past the two activated charcoal filters (2) and passes through the cooled evaporator (3), where it is dried and cooled. Then
some of the dried and cooled air (B) is heated up again due to the position of the left blending air flap actuator motor (M2/6) and the right blending air
flap actuator motor (M2/7) in the heated heat exchanger (4).

The remainder of the dried and cooled air is diverted past the heating system heat exchanger (4) and is blended with the heated air (C) to form blended
air (D) downstream of the heating system heat exchanger (4).

The mixed air (D), via the left defroster vent flap actuator motor (M2/8), the right defroster vent flap actuator motor (M2/9), the left footwell flap
actuator motor (M2/10), the right footwell flap actuator motor (M2/11), the left fresh air flap actuator (M2/19) and the right fresh air flap actuator
(M2/20), is conducted to the air outlets:

-

Footwell Open

-

Vent nozzles Open

-

Defroster nozzles restricted

-

Other flaps can be operated manually

Cooled air (B) is also diverted immediately downstream of the evaporator (3) for indirect ventilation, which is controlled by the cold air addition wheel
at the center vent.
As the result of the position of the left defroster vent flap actuator motor (M2/8) and the right defroster vent flap actuator motor (M2/9), the defroster
vent flaps can be opened if the outside air is dry. The other flaps can be operated manually.

GF83.40-P-2170Q Convenience Automatic Air Conditioning Housing, Location/Task/Design/Function

GF83.40-P-2105-02Q Automatic Air Conditioning Box, Function|Page 13284 > < GF83.40-P-2105-02Q Automatic Air Conditioning Box, Function|Page 13282