CLK 550 Cabriolet (209.472) V8-5.5L (273.967) (2007)
Headlamp Bulb: Service and Repair
AR82.10-P-1201Q Remove/Install Bulbs of Headlamp Unit
AR82.10-P-1201Q Remove/Install Bulbs of Headlamp Unit
- without CODE (614) Bi-xenon headlamp
- without CODE (615) Bi-xenon headlamp with integrated curve illumination
1
Rotate and remove housing cover (low beam) (2) from front left (E1) and right (E2) headlamp assemblies
NOTE: Low beam bulb (7).
2
Simultaneously rotate electrical connection, bulb holder and bayonet ring (8) counterclockwise
NOTE: Low beam (7).
3
Rotate and remove turn signal lamp (4) pedestal
4
Rotate and remove housing cover (high beam, standing lamp) (3) from front left (E1) and right (E2) headlamp assemblies
NOTE: High beam bulb (5), standing and parking lamp bulb (6).
5
Simultaneously rotate electrical connection, bulb holder and bayonet ring (8) counterclockwise
NOTE: High beam bulb (5).
6
Rotate electrical connection and bulb holder counterclockwise
NOTE: Standing lamp and parking lamp bulb (6)
7
Remove bulb
NOTE:
Installation: Do not touch glass of bulbs with bare fingers. Use non-greasy, soft cloth and pay attention to correct installation position.