CLK 55 AMG (208.374) V8-5.5L (113.984) (2001)
NOTE: When removing left exhaust manifold.
6
Slacken left engine mount at front axle carrier
NOTE: When removing left exhaust manifold.
-
Bolt of front engine mounts to front axle carrier = 35 Nm
7
Remove exhaust manifold
NOTE:
-
Left side of engine:
-
Push engine to the right for this step and lift exhaust manifold up and out.
-
Right side of engine:
-
Take out exhaust manifold from bottom.
-
Installation:
-
Replace nuts (156/1).
-
nut to exhaust manifold = 16 Nm
-
Replace gaskets (156/5).
-
If bolts at flange connection of front exhaust system/ exhaust manifold are stiff, or thread damaged:
-
Replace rivet nuts in exhaust manifold.
-
See Special Tools below.
-
Flange connection of exhaust manifold or front exhaust pipes = 20 Nm
8
Install in the reverse order
Special Tools
Cocking Bolt, P/N # 103 589 01 39 00
AR49.10-P-5531-01DA Replacing Rivet Nuts In Exhaust Manifold
Replace rivet nuts in exhaust manifold
103 589 01 39 00 Caulking screw
1
Use a suitable bolt (arrow) to knock rivet nuts out of the holes in the exhaust manifold.