mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 15725 > < Procedures|Page 15723
Page 5
background image

Component Identification

14. Install left and right impact absorber (11) removed from standard bumper into inner section (6).

Insert impact absorber outside (see arrow) and arrest inside.

On vehicles with Parktronic system (PTS), code 220 ensure that PTS wiring harness is routed correctly (routing is defined in impact absorbers).

15. Install spring nuts (12) for fastening front fog lamps (13) in inner section (6) and install front fog lamps (13) with two flange bolts each (M5x12)

(14).

The front fog lamps should be seated correctly in the adjustments (see arrow).

Procedures|Page 15725 > < Procedures|Page 15723