CLK 55 AMG (209.376) V8-5.5L (113.987) (2004)
Scuff Plate: Removal and Replacement
AZ82.20-P-0001-02Q Connect Wiring Harness
Component Identification
1
Crimp the two connecting lines of the wiring harness of the illuminated door sill molding (6) into the cable lug (20) and then put in the fuse holder
(21).
2
Connect wiring harness (6) with fuse holder (21) to a free plug position (arrow) at the rear SAM control module with fuse and relay module
(N10/2).
3
Fit fuse holder 21 with a 7.5 A fuse.
4
Route wiring harness (6) along existing lines in trunk as shown in figure.